PRE-TEC’s Custom Robotic Technologies Featured in New Website

The Precision Technologies Division (PRE-TEC) of Willamette Valley Company recently launched a new, mobile friendly website to better serve our customers and help them understand our services and custom robotic technologies.

The new site integrates a series of helpful videos on nearly every page to clearly demonstrate PRE-TEC’s flexible, automated solutions designed for the Manufacturing and the Wood Products industry.

PRE-TEC began nearly thirty years ago when a group of innovative individuals at Willamette Valley Company saw a need for easy-to-use, accurate equipment for metering chemical products. When they discovered this kind of equipment could not be found, they formed the “Equipment Division”.

In the mid-1990’s, the Equipment Division delved into the robotics field and became “Precision Technologies”, later renamed “PRE-TEC” in 2009.

Today, our PRE-TEC Division team are some of the brightest minds in the industry. This group of engineers have demonstrated time and time again how to change ideas into reality by applying scientific knowledge and innovative manufacturing know-how to the development of precision equipment.

Our team has prepared over 220 robotic systems throughout North America and is currently the largest custom robotic integrator on the West Coast.

We hope you will visit our new website and contact us with any questions and feedback: pre-tec@pre-tec.com or (800) 205-9826.  Be sure to check out all of our PRE-TEC videos on YouTube.  

Please visit www.wilvaco.com to learn more about WVCO’s other divisions.

FANUC America Introduces New CR-35iA Collaborative Robot Designed to Work Alongside Humans

FANUC_America_CR-35iA_Collaborative_robot

The FANUC CR-35iA collaborative robot allows shared workspace between an operator and the interactive robot. (Photo: Business Wire)

WVCO’s strategic robotics partner, FANUC America Corporation, recently announced the company has developed it’s new CR-35iA collaborative robot, the industry’s first 35 kg payload force limited collaborative robot designed to work alongside humans without the need for safety fences.

“The FANUC CR-35iA collaborative robot allows shared workspace between an operator and the interactive robot,” said Greg Buell, product manager, FANUC America. “The highly-sensitive robot gently stops if it comes in contact with the operator, allowing the robot and human to work side by side; in fact, FANUC currently has units running in production at General Motors.”

The CR-35iA robot was developed to help manufacturers solve ergonomic challenges by handling applications that are physically demanding for humans, such as heavy lifting.The robot’s shell is green to distinguish the collaborative robot from the standard yellow FANUC robots.

WVCO is proud to have a long time partnership with organizations like FANUC America.  Our robotics division, PRE-TEC, has partnered with the company to develop automated manufacturing solutions using six axis robots and other precision equipment for customers all over the world. Earlier this year, we introduced introduced M2000iA, FANUC’s largest robot available in the North American market.

Large Robots

Standing with M2000iA

Click here to learn more about FANUC’s CR-35iA collaborative robot. You can also visit the company’s website at www.fanucamerica.com.

About FANUC America Corporation
FANUC America Corporation is a subsidiary of FANUC CORPORATION in Japan, and provides industry-leading robotics, CNC systems, and factory automation. FANUC’s innovative technologies and proven expertise help manufacturers in the Americas maximize efficiency, reliability and profitability.

International Airfield & Highway Pavements Conference

International Airfield & Highway Pavements Specialty Conference 2015

Photo courtesy of International Airfield & Highway Pavements Specialty Conference 2015

WCVO’s POLYQuik team is headed to the Miami for the International Airfield & Highway Pavements Conference, June 7-10, 2015. This year’s conference theme is “Innovative and Cost-Effective Pavements for a Sustainable Future” and is centered on the latest technologies and best practices in the areas of innovative, durable, cost-effective and more sustainable pavements.

The conference is presented by The Transportation & Development Institute (T&DI), a specialty membership organization focused on transportation and development professionals and the transportation and development industry. It is one of the American Society of Civil Engineer‘s eight specialty Institutes.

Our team is looking forward to the special opportunity to meet directly with engineers, planners, industry representatives, citizen groups, developers, and public officials from around the world to demonstrate how our concrete repair products can help to alleviate many of the challenges for airfield and highway pavement sustainability, rehabilitation and performance.

 

“The conference includes examples of both current practice and the latest results of research, development and implementation of cutting edge pavement technology and practice”, says Conference Co-Chairs Dr. John Harvey and Dr. Katie Chou wrote in a joint statement. “It brings together professionals involved in design, construction, management and research to share and discuss new ideas to meet our common challenges”.

If you are headed to the conference, we invite you to stop by our booth to learn about what POLYQuik can offer. POLYQuik Fastpatch concrete repair products are fast curing, tough materials. Each product is designed with ready-to-use package to meet your application needs. For more information, please visit www.polyquik.com.

photo credit: by and by via photopin cc

photo credit: greeleygov via photopin cc

2014 FAA Worldwide Airport Technology Transfer Conference

When we mention POLYQuik Fastpatch concrete repair products, one may associate them with filling voids, defects and damaged areas in roadways, parking lots, warehouses and sidewalks; but did you know our POLYQuik products are also optimal for airport runways, taxiways, and aprons?

WVCO representatives are headed to Galloway, NJ early next month with airport operators, aviation consultants, construction contractors, research engineers, and academic researchers at the 2014 FAA Worldwide Airport Technology Transfer Conference!

The conference, sponsored by the Federal Aviation Administration and The Richard Stockton College of New Jersey August 5-7, 2014, will be a unique opportunity for our team to focus attention on how our concrete repair products can be used to improve airport safety and pavement technologies.

The keynote speaker for this event will be Scott Murrell, the Chief Civil Engineer of the Port Authority of NY & NJ. During his extensive career, he has designed numerous pavement, rail, drainage and utility projects. Airfield projects range from reconstruction of major runways to designing a precast concrete taxiway pavement. The conference will be held at the Stockton Seaview Hotel and Golf Club, located near some of the top attractions on the Jersey Shore.

If you are headed to the conference, we invite you to stop by our booth to learn about what POLYQuik can offer. POLYQuik Fastpatch concrete repair products are fast curing, tough materials. Each product is designed with ready-to-use packaging to meet needs your application. For more information, please visit www.polyquik.com.

photo credit: greeleygov via photopin cc

photo credit: by and by via photopin cc

After 25 Years, Our PRE-TEC Division is Still Changing Ideas into Reality

There’s an old saying that goes “Necessity is the mother of invention” and that most certainly applies to PRE-TEC, the equipment division of Willamette Valley Company.

More than twenty-five years ago, a group of innovative, take-charge individuals at Willamette Valley Company saw a need for easy-to-use, accurate equipment for metering chemical products. When they discovered this kind of equipment could not be found, they formed the “Equipment Division”.

In the mid-1990’s, the Equipment Division delved into the robotics field and became “Precision Technologies”, later renamed “PRE-TEC” in 2009.

Since then, WVCO’s PRE-TEC division has prepared over 165 robotic systems and is currently the largest custom robotic integrator on the West Coast having installed systems throughout North America.

Our PRE-TEC Division team are some of the brightest minds in the industry. This group of individuals understand how to change ideas into reality by applying scientific knowledge and innovative manufacturing know-how to the development of precision equipment.

PRE-TEC offers support in areas of training, programming, spare parts, and preventive maintenance. Download our company overview for contact information and to learn more: Please visit www.wilvaco.com to learn more about WVCO’s other divisions.